TPHD2016F High Speed CNC Drilling Machine For Train Wheel
  • 1. This machine is mainly used for drilling and milling of steel plate in the steel structure industry such as building, bridge, iron tower, etc., and can also be used for drilling and light milling of tube plate, baffle plate and circular flange in boiler and petrochemical industry. It is used for drilling through hole, blind hole, ladder hole, chamfering and milling. Maximum processing range is 2000 x 1600mm.

    2. CNC slide way drilling spindle (Z axis) with work piece of stroke is pre-set, realized auto switch with high efficiency, simple-structure, low-cost maintenance, easy operation etc.

    3. The main shaft of drilling head adopts Taiwan BT50 high precision shaft with internal cold rigidity. Equipped with hydraulic tool cylinder. The spindle is driven by a high-power servo motor with synchronous belt, and the spindle speed is 30 ~ 3000r/min.

    4. This machine have three CNC axis: gantry moving direction (x-axis);drilling head moving direction (y-axis); Spindle feeding direction (z axis). Machine equip each axis with linear guide and ball screw which is driven by high precision servo motor.

    5. Pneumatic automatic centering device is arranged on the plane of the work table, as well as several transverse T slots. 3 sets of hydraulic clamps are used to install clamping fixture and work piece. Automatic centering repeat positioning precision is not greater than 0.1mm.

    6. Machine have scrap cleaner which collect iron scraps and cutting liquid. Front door with sliding door, loading and unloading work piece.

    7. The machine equipped with automatic lubrication system for linear guides and ball screws.

    8. Machine adopts SIEMENS 808D system, also equip with computer for drawing and work piece program processing, easy to operate.

    9. The configuration of the machine, like ball screws, linear guides, main electrical parts, servo motors, inverter, etc., all famous brands. 

    10. We can install the tool magazines according to customer's requirement to realize automatic tool change function.

  • ItemsModelParameters
    Max work piece sizeLong*Width2000X1600mm
    Thickness of work piece
    Working tableWidth of T-slot22mm
    Slide way drill headQuantityone
    Spindle taperBT50
    Max drilling diameterΦ60mm(reaming Φ80mm)
    Rotating speed30—3000r/min
    Motor power30kW
    Distance from spindle end to work table200-800mm
    Gantry vertical moving direction (x-axis)Max stroke2000mm
    Moving speed of x-axis0-10m/min
    Servo motor power of x-axis3.5kW
    Drilling head moving direction (y-axis)Max stroke of drill head1600mm
    Moving speed of y-axis0-10m/min
    Servo motor power of y-axis1.5kW
    Sliding vertical feeding moving direction (z axis)Max stroke of z-axis600mm
    Moving speed of z-axis0-5m/min
    Servo motor power of z-axis3.5kW
    Tool magazineQuantity and tools1set and 8 pieces
    Position precisionx-axis0.08mm/Total length
    y-axis0.08mm/ Total length
    Reposition precisionx-axis0.03mm
    Hydraulic systemHydraulic pump pressure6MPa
    Hydraulic pump motor power3kW
    Pneumatic systemCompressed air supply  pressure≥0.5MPa
    Electric systemCNC systemSIEMENS
    CNC axis quantity3
    Total power
    About 48kW
    Overall sizeL*W*HAbout 4.5*3.9*3m
    WeightAbout 14.5t

This machine tool is mainly used for drilling and milling of plate workpieces in the steel structure industry such as construction, bridges, and towers. ; Used for drilling through holes, blind holes, stepped holes, hole chamfering and workpiece milling. The maximum processing range is 2000×1600mm.



Applicable Industry: